在线钢化设备为全自动压机配套设备，在客户生产钢化类压制产品时，不再需要配置抛光机、退火炉等设备，只需在压机后配套抛光/钢化一体机。

该机器长约16米，由抛光区、均温区、钢化冷却区三个区组成。玻璃制品从压机自动取出后，放置在耐热不锈钢制成的钢化篮内，产品依次通过以上三个区域，完成产品的抛光、钢化升温、钢化冷却三个过程，最后通过钢化取出机械手取出放置到输送带上，即直接完成了玻璃产品的钢化生产。整个钢化生产过程均为全自动化生产。
该工艺技术大大节省了玻璃器皿企业的能耗成本、人工成本、物流运输成本。        

Press online tempering facilities are corollary equipment for fullautomatic press machine, our client will have no more
need of facilities like polish machine, annealinglehr and so on, only need to set a polisher/tempering combine machine to support the press.

   The polisher/tempering combine machine is about 16 meters long; it consists of polishing zone, uniform temperature
zone and tempering cooling zone. Those glass production taken out from the press will be placed in a tempering
basket
which is madeof heatresistance stainless steel, and they will go through the 3 zones above to be disposed via
polishing, tempering warming and tempering cooling in sequence, and finally the end products will be put to
conveyer belt by mechanical arms. The whole process of tempering production is fully automated.

   This technology may greatly save the cost of energy consumption, labor, and logistics transportation for glassware
production enterprises.